本帖最后由 北美汽车快报 于 2014-3-18 07:29 编辑
Selling my 90 mazda Rx7 FC, 1.3L rotary with turbo. Rebuilt engine with 4K miles on it. 100K on Body. Always use premix. Mod spec: Engine: S4 Turbo irons with street port, S5 housings, S5 N/A 9.7:1 rotors, Atkins 2mm apex seals, FD corner seals and springs. Omp removed. Turbo: Ht 18s hot side and center section. Garret T04 cold side compressor and housing. Injectors: Primaries are 650cc, secondaries are 960cc. Bov: ebay knock off. Intercooler: Greddy. Wastegate: turbonetics. Radiator: stock. Use 50/50 if keep outside. Exhaust: HKS Hi Power No cat, custom down pipe. Suspension: Kyb Agx struts appx 5 years old and Tien S tech springs. Poly bushings in front and Mazda trix rear camber adjustment rod. Brakes: stock 4pot front and stock rear. ECU: Megasquirt 1v2.2 (Go to Msefi.com for more info) Running Megasquirt and spark extra software. Megatune is the name of the software that is needed to tune and adjust parameters in the ECU. LSD: S4 turbo trans and Lsd. A/C removed, only has hot air. Custom Roll bar.
Fun car to drive. Will post pic when I have time.
|